97280 15000
  1. Home
  2. Services
  3. Crusher Part Repair & Rebuild
Workshop service

Crusher Part Repair & Rebuild

क्रेशर पार्ट्स की मरम्मत · तसल्ली बख्श काम

Worn or broken crusher parts repaired, machined and put back to work in our own workshop at Charkhi Dadri. When a part can be saved, we save it. When it can't, we tell you straight and supply a new or used replacement.

  • In-house workshop
  • Jaw, cone and screen parts
  • Parts made from your sample
  • Honest repair or replace advice
Workshop mechanic in a safety helmet grinding the bearing seat of a jaw crusher pitman during repair
Our workshop, Vill. AtelaNear National Sr. Sec. School, Charkhi Dadri
Overview

Fix the part, keep the plant running

A broken pitman, a worn shaft seat or a cracked housing can stop a whole crushing line. Waiting for a new part costs you production every day. Many of these parts can be repaired or rebuilt locally in far less time than it takes to source a new one.

Bring the part to our workshop or send us photos first. We check what can be saved, give you a clear quote, and do the work in-house: machining, fabrication, fitting new bushes, and making matching parts from your old sample.

Less

Downtime

A local repair is usually faster than waiting for a new part to arrive.

Lower

Cost

Rebuilding a heavy part often costs a fraction of buying it new.

Same

Fit

Repaired parts keep their original dimensions, so they go back in without changes.

What we repair

Parts we bring back to work

Don't see your part? Send a photo. If it goes into a crusher, screen or conveyor, we can usually help.

Pitman and crank assembly under repair

Pitman & crank

पिटमैन · क्रैंक

Bearing seats restored, cracks repaired and worn areas rebuilt on jaw crusher pitmans and cranks.

Ask about this repair
Drum and shaft in the workshop for repair

Shafts & housings

शाफ्ट · हाउसिंग

Worn shaft journals, bearing housings and flanges machined back to size.

Ask about this repair
Bushes ready for fitting

Bushes & bearings

बुश · बेयरिंग

Old bushes removed, new ones made and fitted, and bearing seats corrected.

Ask about this repair
Machined liner segments

Liners & guards

लाइनर

Liner segments, arm guards and wear plates machined or fabricated to match your old piece.

Ask about this repair
Heavy flange and bars in the workshop

Frames & brackets

फ्रेम · ब्रैकेट

Cracked frames, brackets and mounts welded, strengthened and squared up.

Ask about this repair
Conveyor drum pulley being rebuilt

Rula & greasing lines

रूला · ग्रेजरी

Rollers rebuilt and greasing lines repaired or replaced so parts stay lubricated.

Ask about this repair
How it works

From broken part to back in the crusher

  1. 1

    Share the problem

    Send photos or a short video of the part on WhatsApp, or call us.

  2. 2

    Inspection

    Bring the part to our workshop and we check the damage and measurements.

  3. 3

    Quote

    You get a clear price and time for repair, with a replacement option if needed.

  4. 4

    Repair

    We machine, fabricate or rebuild the part in our own workshop.

  5. 5

    Hand over

    Collect the finished part, or ask us to arrange transport to your plant.

Our workshop

What our workshop can do

  • Machining & finishingShafts, seats, flanges and liners brought back to the right size.
  • Fabrication & weldingFrames, brackets, guards and plates cut, welded and strengthened.
  • Rebuilding worn partsWorn areas built up and finished instead of scrapping the whole part.
  • Parts from a sampleSpecial rula, pitman, jaw and greasing parts made from your old piece or drawing.
  • New screens & cranksNew झरना and cranks built to fit your machine.
Conveyor drum pulley being rebuilt in the workshop Crusher flywheel in the workshop for repair Motor in the workshop for repair
Repair or replace?

We'll tell you which makes sense

Repair it when

  • The main body of the part is sound and only seats or edges are worn
  • A new part would take too long to arrive
  • The part is heavy or costly, like a pitman, crank or housing
  • The machine is older and new parts are hard to find

Replace it when

  • Cracks run through the main body of the part
  • It is a wear part like a jaw plate or liner that has reached its limit
  • The repair would cost close to a new or used part
  • The part has already been repaired many times

If replacing is the better choice, we can supply the part new or used from our stock.

Crusher parts in the yard at our Atela workshop
Visit the workshop

Bring your part to Atela

Drop the part at our workshop for an inspection, or call first and we will tell you what to bring.

Vill. Atela, near National Sr. Sec. School, Charkhi Dadri, Haryana
FAQ

Common questions

Can you tell if a part can be repaired from photos?

Often, yes. Send clear photos of the damage from a few angles and the part number if there is one. For some parts we need to see and measure them at the workshop before we can quote.

How long does a repair take?

It depends on the part and the damage. We tell you the time along with the quote, before any work starts.

Do I have to bring the part to the workshop?

For most repairs, yes. Bring it to our workshop at Vill. Atela, Charkhi Dadri. If that is difficult, call us and we will work out the best way.

Can you make a new part from my old one?

Yes. We make special rula, pitman, jaw and greasing parts, new screens and cranks, and other parts from your old sample or drawing.

What if the part can't be repaired?

We will tell you honestly and offer a new or used replacement from our stock, so you can decide what works best for your budget.

Get a quote

Tell us about the part

Describe the part and the problem. Photos on WhatsApp help us quote faster.

Get a repair quote

Tell us what you need and our team will call you back with price and stock.

Related services

More from our workshop